Ponds and Water Features

Ponds and Water Features

BIO-UV Group provides solutions for reliable protection against biological contaminants commonly found in indoor pond & water features that can prove hazardous to health.

BIO-UV and triogen® UV-C sterilizers prevent from the development of pathogenic diseases.

The low-pressure high power UV lamps with high purity quartz sleeves, and UV intensity monitoring, allows units to be readily fitted to any new or existing water treatment facilities as the space requirement is minimal and can be installed vertically if required.


TR2 UV Disinfection for Private Residential Pools

triogen® UV Ultra

The TR2 range of ultraviolet units is designed to provide residential swimming pools and spas with a cost effective UV system for disinfection and improved water quality. The reactor bodies are manufactured from UV inhibited polymeric materials making them suitable for use with pools utilizing salt water chlorinators or standard chemical dosing. The units simply connect to a suitably protected mains power supply and come complete with union adapters, pressure gauge and flow-switch. Units are available for flows of 11, 22, and 32m³/H.



triogen UV SMP Disinfection System

triogen® UV SMP

The triogen® UV SMP range offers compact and high efficiency system for medium and large ponds, lakes or water features with a range of flow rates from 23 to 1 000 m3/h with exceptional reliability and ease of operation. The medium pressure lamps are powered by electronic ballasts. The lamps are inserted in pure quartz thimbles isolating them from the water. The lamps can be easily changed when indicated by the micro-processor control unit. A UV sensor is available in option to monitor UV intensity. The periodic maintenance of the system has been made very easy by allowing the removal of the full lamp assembly.



Compact Ozone Generator for Private Residential Pools

triogen® O3 S

The Compact range of wall mounted ozone generators incorporating ceramic corona discharge modules for powerful performance and long term reliability whilst operating under vacuum for operator safety. A full range of accessories are available including compact vacuum air dryers, contact-degassing units, vent systems,injectors and pumps. By combining units, outputs range from 1 to 8 grams per hour.



UV Ozone Generator for Private Residential Pools

triogen® O3 XS

The triogen® O3 XS range of low output wall mounted ozone generators incorporating high intensity low power UV lamps specifically designed for residential pools, jacuzzis and spas use. The systems operate under vacuum conditions for operator safety. A full range of accessories are available including contact-degassing tanks, vent systems, injectors and booster pumps. Ozone outputs up to 0.5 grams per hour.



o3 M Ozone Generators

triogen® O3 M

The triogen® O3 M range of ozone generators are a cost effective alternative to the M4 Series but utilise the same operating design parameters and water cooled corona discharge modules. The generators include air dryers and are available with either manual or automatic ozone output control.Units are available with outputs from 15 to 200 grams per hour.



Uvaray CF Medium Pressure UV Disinfection Systems

triogen® UV CF / CF-LT

A cost effective alternative to the standard Uvaray UV Systems utilising similar Medium Pressure UV lamp and ballast technology. The UV vessel has an in-line design and is manufactured in 316 Stainless Steel. The in-line design makes it simpler to install and results in lower capital costs and power consumption when compared with standard UVARAY systems. The control Panel incorporates the usual Uvaray® microprocessor control, Smartdrive® automatic wiper system, UV intensity monitoring, and power turndown for overnight operation. Units are available for flows up to 1,000 m3/h.



triogen UV SPA

triogen® UV SPA

triogen® UV SPA range of equipment is a cost effective addition to the range of triogen® UV systems offering small/private pools, spas and aquariums the benefits of medium pressure UV technology at lower cost. The reactor body is supplied in stainless steel with uPVC connections. The units have a unique lamp and thimble removal system which allow an easy manual cleaning without the need of special tools. Units are available for flows up to 75 m³/h.